It’s just like it looks on videos, it adds SO much more pressure, it comes with water filters as well! I’ve taken it apart a few times and it still leaks TINY drips , but it doesn’t take away from the pressure, so far so good, will update review in a few months (UPDATE) THE SHOWER HEAD IS STILL GOING STRONG !! I unscrewed it yet again and got her perfectly on track and now NO DRIPS! The drips didn’t effect the pressure at all, this this is crazy strong! Only con: it only had one setting, pressure or less pressure, there’s no “massage” or “spray”or “cone” settings. ((UPDATE)) the shower head literally exploded from the back !! Not even a full 3 months of use because I’ve moved and before I moved my master shower was broken and I used the other one, but for the price I guess you get what you pay for

I bought this as a joke for my husband. Jokes on me because I actually like it. It’s got quite a bit of spraying power and the rotating spray is pretty cool! The stop button is cool and all, but I don’t use it.
Only downsides are that it feels very flimsy and thin. I don’t expect it to last forever, but while it lasts, I’ll enjoy it. Also, the spray is great as it’s coming out, but as it continues down it turns into a mist and makes my shower curtain go out past the tile and water ends up in the floor. I have to use shampoo bottles to keep it my curtain in the shower. Lots of air.

I’d buy another if I wanted to. Works and it’s cool looking

I'm going to list the cons and their potential workarounds first, because even though they're few, they might be deal-breakers for some people.

Cons:
Most importantly—and I think this is a key flaw—the water temperature varies more than any other shower head I've ever used, and it's a consequence of its design. Because of the very small size of the holes, which are necessarily small to make this head work like it does, the water streams have extremely low volume-to-surface-area ratios, and cool off quickly as a result—so quickly, in fact, that I can have the water scalding hot at the head (which sits at around 6 feet), and by the time it reaches my feet, it's lukewarm. This has nothing to do with my feet, either, because that temperature difference is confirmed by the rest of my body if I simply sit down. This is especially important if you want to use this in a sitting walk-in tub, for instance, or just, you know, want your feet as warm as the rest of you without doing shower gymnastics. There are some potential workarounds for this, assuming your water heater can't produce hot enough water to overcome the problem on its own (like mine). One is to seal your shower curtain to the wall, thereby capturing the air's thermal energy inside and reducing the amount that the water cools. You can also turn on your bathroom's heater, if it has one, and that would help. Another is to only use this in a standing shower with an existing air seal, where the shower design itself helps prevent the water from cooling that much. The best option, I think (and the one I plan to do), is to simply get a T-junction for your shower pipe and install a second shower head. This is pretty easy to do, and you can find plenty of extra hoses and a wall-mounted shower head holder, too. Because this head uses so incredibly little water, even a dinky little water heater would easily handle both heads, and you'd also get a luxury shower experience without the luxury price. It has a shut-off button, so you can control when it uses two heads and when it uses one. The drawback there, of course, is that you're spending twice as much to make up for the shortcomings that this shower head has, and when you've already put in some energy to find this particular listing, where it's less expensive than other listings, that kind of defeats the purpose. I just want a two-head shower experience regardless, so I'm going with the last option. The amount I'll save in water consumption ought to pay for the extra head and gear in about 30 years. (I kid, but realistically it could be just a few months, but it'll pay for itself eventually. )

The next con is the cost of the filters. The filters are nice, but for one, I really don't think they're necessary unless you have some really bad water, in which case you probably have a house-level filter on your main line already. I just can't justify the filter cost, so once the two that came with this run out, I'll be ditching them.

An easily remedied con is the way it leaks upon initial installation. Mine leaked like a sieve from the hose junction (video attached) because the screw stem was shorter than the head that the hose was meant for (picture attached). It was easily fixed by adding another O-ring, but some plumber's tape ought to do the same job just swimmingly. Either way, it was a quick fix, but once I fixed that, a small leak appeared around the edge of the hole plate. That was really easily fixed by unscrewing the rim that holds the plate onto the front of the head and adjusting the O-ring. I moved the ring to the other side of the plate and it fixed it right away. Now the whole thing is watertight (wherever it's supposed to be).

Pros:
Everything else. Seriously. That may look like quite a list of deal-breaking cons, but I'm only being thorough. For one thing, the head works exactly like it does in all of the ads that prompted me to find it. Those ads try to sell this to you for twice the price, but it's the same head. (Side note: some of those ads show an all-white, opaque head with a different design that has the same kind of water spray, and I want to find that one next. ) I've managed to work out how this thing creates the flanged vortex of water that it does, and it's pretty darn clever. Once the cleverness wears off, it maintains its own wow factor by using almost no water. I actually tried the thing I saw in one of the ads where I put my existing shower head on a mere trickle, then unscrewed it and put this one on without turning the water off, and boom, it was a powerful spray. This head kind of markets itself in the water conservation department.

One thing you might notice is that the water doesn't drain from the head. Every shower head in existence does this same thing to some degree, but most others aren't clear, so you don't notice. I see this as another pro because it makes you aware that there's water still in there, so if you're going on a long trip, you can just unscrew the front of the head and let it drain. You can even leave it off so it dries out and doesn't promote mold growth.

The last and best pro as far as I'm concerned is that this shower head makes showering fun for kids. My daughter wanted to take a shower as soon as she saw the propeller in the back and the cool shape of the water streams. She's 4, so it's important to prevent the water from getting too hot for her, and the con I wrote above about the temperature drop turns into a pro here because even the hottest water in my house can't scald her thanks to this head. That's a win in my book.

Verdict:
I love it. It's one of the very few items I've seen advertised incessantly that I've not only been interested in but actually ended up liking. Usually, those items are nothing like their claims, but this one, despite one major flaw, lives up to its claims, and I think it's uniquely worth it to find a workaround or fix for its flaws, rather than discarding the whole thing.

Al desempaquetar el producto pensé qué tal ves no serviría pero …. . wow… al conectar y hacer salir el agua se sintió como cualquier artículo de miles de dólares , no se cuanto tiempo durará pero al menos la primera impresión es sensacional, gracias

Like the title says, Buyer Beware!
If you read the reviews prior to buying then you won't be super surprised with what you get.
Quality is that of Alibaba out of China. Yes it's accurate to say this is constructed of the cheapest plastic material and design. If you don't read the reviews you may miss the fact it doesn't come with the hose nor the holder which is poorly conceived by the manufacturer and no thought by the retailors. It's so cheaply made no you shouldn't be surprised that it leaks. The one i received has a minor leak through the on/off valve.
Moving past the poor quality, does it work? Actually yes it does! I'm no fluid dynamic engineer but the little fan thingy that spins i don't believe is adding any value other then look at the little fan thing spinning. How it work is more but smaller holes for the water to push through which results in a higher pressure spray.

Overall, not a great product, don't expect quality but depending on what your replacing it has potential to be better if your looking for a better pressure out if you have low pressure water to begin with.

I don’t give a lot of 5 star reviews but this is LEGIT. It’s amazing. And yeah: it seems a bit fragile compared to metal ones but so long as you’re not an idiot: it’s fine. Honestly: for $15 I am blown away. It has the feel of “rain” setting but with 20x the pressure and not in a rough way. It’s so cool to use. My kiddos love it and trying to get them to use the shower instead of baths has been impossible til now. Also! Bonus points for no leakage. I didn’t even need to use Teflon tape. It’s exceeded expectations by far. A+++